Specification Sheet

ManualsBrandsForney ManualsSolder & FluxLiquid Flux for Soldering, 2-Ounce Bottle

Table Of Contents

Page 1 of 6

SAFETY DATA SHEET

DATE REVISED: January 1, 2018

SECTION 1 -- IDENTIFICATION

Product Name/Part number: Water Soluble Liquid Flux

Recommended use: Soft Soldering Flux

Forney SKUs: 38120, 60301

Manufacturer: Forney Industries, Inc. Mfg. Phone No. 800-851-6038

2057 Vermont Drive

Fort Collins, CO 80525

Emergency Phone No.: 1-800-535-5053

SECTION 2 – HAZARD(S) IDENTIFICATION

Classification of the substance or mixture

GHS Classification in accordance with OSHA HCS (29 CFR 1910)

Acute toxicity, Oral (Category 4) H302

Skin corrosion (Category 1B) H314

Serious eye damage (Category 1) H318

Acute aquatic toxicity (Category 1) H400

Chronic aquatic toxicity (Category 1) H410

See below for full text of H-Statement

GHS Label Elements, including precautionary statements

Pictogram(s):

Signal Word: Danger

Hazard Statement(s)

H302 Harmful if swallowed

H318 Causes serious eye damage

**H314 Causes severe skin burns and eye damage

**H400 Very toxic to aquatic life

H410 Very toxic to aquatic life with long lasting effects

**May be omitted from label due to presence of stronger statement.

Precautionary statement(s)

P260 Do not breath mist, fumes, or vapors

P264 Wash skin thoroughly after handling

P270 Do not eat, drink or smoke when using this product

P273 Avoid release to the environment

P280 Wear protective gloves/protective clothing/eye protection/face protection

P301+P312+P330 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.

Rinse mouth

P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.

Rinse skin with water/shower.

P304+P340+P310 IF INHALED: Remove person to fresh air and keep comfortable for

breathing. Immediately call a POISON CENTER/doctor

38120

Summary of content (6 pages)

PAGE 1
38120 SAFETY DATA SHEET DATE REVISED: January 1, 2018 SECTION 1 -- IDENTIFICATION Product Name/Part number: Water Soluble Liquid Flux Recommended use: Soft Soldering Flux Forney SKUs: 38120, 60301 Manufacturer: Forney Industries, Inc. Mfg. Phone No. 800-851-6038 2057 Vermont Drive Fort Collins, CO 80525 Emergency Phone No.
PAGE 2
P305+P351+P338+P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call POISON CENTER/doctor P363 Wash contaminated clothing before reuse.
PAGE 3
SECTION 7 - HANDLING AND STORAGE Precautions for safe handling: Avoid contact with skin and eyes. For full precaution statements see Section 2 Storage Requirements: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION CONTROL PARAMETERS OSHA Permissible Exposure Limit (PEL): 2.5 mg/m3 ACGIH Threshold Limit Value (TLV): 2.
PAGE 4
SECTION 9 - PHYSICAL AND CHEMICAL CHARACTERISTICS Appearance Odor Odor threshold pH Melting point/Freezing point Initial boiling point and boiling range Flash point Evaporation rate (Butyl Acetate = 1) Flammability (Solid, gas) Upper flammability or explosive limits Lower flammability or explosive limits Vapor pressure Vapor density Relative density Solubility(ies) Partition coefficient: n-octanol/water Auto-ignition temperature Decomposition temperature Viscosity Red liquid None No data available 4.00-5.
PAGE 5
SECTION 12 - ECOLOGICAL INFORMATION Toxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Other adverse effects Hazard to ozone layer: No data available SECTION 13 - DISPOSAL CONSIDERATIONS Waste treatment methods Product Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product. SECTION 14- TRANSPORTATION D.O.T.
PAGE 6
SECTION 16 - OTHER INFORMATION Further information: Judgments as to the suitability of information herein or the purchaser's purposes are necessarily the purchaser's responsibility. The above information does not represent any guarantee of the properties of the product. It is believed to be correct, but does not purport to be all inclusive and should be used only as a guide. Reasonable care has been taken in the preparation of this material, and is based on the present state of our knowledge.