SDS

4. FIRST AID MEASURES
4.1 Ingestion: Treat as dilute emulsion solution – call physician.
4.2 Skin contact: Wash off with water.
4.3 Skin contact: Wash with soap and water.
4.4 Eye contact: Flush with water for 15 minutes. If irritation persists get medical attention. Direct contact with
eyes can cause irritation.
Acute and/or Chronic Effects/Aggravated Medical Conditions: No known chronic effects.
Eye Contact: Direct contact with eyes can cause irritation.
Skin Contact: Repeated contact and exposure may cause skin irritation.
Ingestion: Treat as dilute emulsion solution – call physician.
Inhalation: Inhalation may cause nausea and irritation.
5. FIRE FIGHTING MEASURES
5.1 Extinguishing agents: Foam, CO2, Dry Chemical, Water Fog
5.2 Advice: Self contained positive pressure breathing apparatus and protective clothing should be worn. Cool
fire exposed containers, surrounding equipment and structures with water.
6. ACCIDENTAL RELEASE MEASURES
6.1 Clean-Up Method: Use clay or other inert material sand or vermiculite to absorb, if needed. Rinse area
afterwards with copious amounts of soap and water. Do not release into sewers or waterways. Damp mop
contacted surfaces for any residue.
7. HANDLING AND STORAGE
7.1 Handling: Avoid contact with eyes. Do not ingest or inhale. Good hygiene practices should be followed when
handling this material. Wash thoroughly after handling.
7.2 Storage: Keep container tightly closed and in a cool, well ventilated area. Keep product from excessive heat.
8. EXPOSURES STANDARDS AND PERSONAL PROTECTION
8.1 Respiratory Protection: None required with normal use. If concerned, use only in a well ventilated area.
8.2 Skin Protection: If sensitive, use nitrile/rubber gloves to minimize contact.
8.3 Eye Protection: Do not get product in eyes. Use safety glasses/goggles if contact is a concern.
8.4 Other: Follow good hygiene practice.