Instructions / Assembly

Caster Pipe Cap

FORMUFIT Caster Pipe Caps connect PVC Pipe assemblies to caster wheels over the end of a

PVC pipe. To connect this product to PVC pipe and casters, choose a caster style below, then

follow the instructions shown.

1A. Connecting Grip-Ring Casters

Grip-ring stem casters to allow you to easily insert and remove a caster from a Caster Adapter

by simple insertion. FORMUFIT Swivel Casters are grip-ring stems and are the simplest

option and will easily insert into Caster Pipe Caps.

To connect a grip-ring caster to a Caster Pipe Cap, perform the following:

https://formuﬁt.com

PRODUCT INSTRUCTIONS

Insert the stem of the grip-ring caster

into the hole on the bottom (smooth

end) of the Caster Pipe Cap.

If needed, use a hammer and gently

tap into place until the grip ring

appears on the opposite end of the

cap.

Please note that the Caster Pipe Cap will only insert over the end of a PVC Pipe

and will not work inside of PVC ﬁttings. If you require a caster connection to PVC

ﬁttings, please use the Caster Fitting Insert, also available on formuﬁt.com.

PAGE 1
PRODUCT INSTRUCTIONS Caster Pipe Cap FORMUFIT Caster Pipe Caps connect PVC Pipe assemblies to caster wheels over the end of a PVC pipe. To connect this product to PVC pipe and casters, choose a caster style below, then follow the instructions shown. ! Please note that the Caster Pipe Cap will only insert over the end of a PVC Pipe and will not work inside of PVC fittings. If you require a caster connection to PVC fittings, please use the Caster Fitting Insert, also available on formufit.com. 1A.
PAGE 2
1B. Connecting Threaded Stem Casters Threaded stem casters are more commonly available and come in many stem and wheel sizes. FORMUFIT Caster Pipe Caps will accept any threaded caster that has a stem diameter of 1/4", 3/8" or 7/16” and must be at least 1-1/2” in length. To connect a threaded stem caster to a Caster Pipe Cap, perform the following: 1 2 Insert the stem of the threaded caster into the hole on the bottom (smooth end) of the Caster Pipe Cap.
PAGE 3
Securing For permanent and strong connections, it is recommended to use PVC cement/solvent to attach the PVC fitting and Caster Pipe Cap. In most cases, Caster Pipe Caps do not need to be cemented so that they can be removed and reattached for breakdowns or for storage. All rights reserved. TM, ® & Copyright © 2009-2018 FORMUFIT LC https://formufit.