User's Manual

RC240 3D Mouse Presenter V1.3
9
Volume Adjust
Press and hold OK key,
rotating Presenter clockwise
will enlarge the volume.
Rotating counter-clockwise
will decrease the volume. The
volume meter will be shown on
the right up corner of the
screen.
Standard Mode
Standard Mode has all the
functions in Basic Mode plus many
other useful features.
Right click the aimMaster™ Pro
icon and select Mode from the
pop-up menu. Choose “Standard
Mode”. The icon in System Tray
becomes .
Standard Mode Key Definitions
Refer to the following key definitions for the functions you may use.
Key Action Function
If Presenter is Off, this click turns power to On
Click
If Presenter is On, this click forces Slide Show
(shift F5) or Close Slide Show (ESC)
POWER
Press & hold until
Purple LED is On
Turns Presenter to Off.
Click
Enables or Disables 3D Mouse.
If 3D Mouse is enabled, the blue light of
LASER key is flashing.
LASER
Press & Hold
Show the Virtual Laser Pointer, (Laser Pointer
icon is changeable, refer to P10)
Click
Each click will cycle from Mouse Cursor
Check Mark Line Mark. The cursor
changes from
  respectively.
The icon on the System tray will be changed
as
  .
FEATURE
Press & Hold for 2
seconds
All Presenters vibrate for 5 seconds (the host
can inform time-end to the orator).
In Mouse Cursor operation Page up
Click
In Check Mark or Line Mark
operation
Undo previous
mark
UP
Press & Hold Scroll up
DOWN Click In Mouse Cursor operation Page down