User's Manual

RC240 3D Mouse Presenter V1.3
7
Basic Mode Key Definitions
Key Action Function
If Presenter is Off, this click turns power to On.
Click
If Presenter is On, this click forces Slide Show
(shift F5) or Close Slide Show (ESC)
POWER
Press & hold
until Purple LED
is On
Turns Presenter to Off.
Click
Enables or Disables 3D Mouse.
If 3D Mouse is enabled, the blue light of
LASER key is flashing.
LASER
Press & Hold
Show the Virtual Laser Pointer Icon, (Laser
Pointer icon is changeable, refer to P10)
Click Page up
UP
Press & Hold Scroll up
Click Page down
DOWN
Press & Hold Scroll down
OK Press & Hold
Turn Presenter clockwise to increase the
system Volume, and turn Presenter
counter-clockwise to reduce the system
volume
LEFT Click Mouse Left key, only when 3D Mouse is
enabled
RIGHT Click Mouse Right key, only when 3D Mouse is
enabled
FEATURE
No function
Flashes Amber: Presenter is Charging
Charging
Off: Presenter is fully charged
Flashes Blue: when battery is between 100%
~ 40% of full capacity.
LED on
LASER
key
Click any key
Flashes Amber: when battery is under 40% of
full capacity.
Virtual Laser Pointer
Press and hold LASER key to
activate the emulated Laser
Pointer. Move Presenter will move
the Laser pointer on the screen.
Please refer to the User’s Manual
to select your own virtual laser
pointer icon.
Enable/Disable 3D Mouse
Click LASER key once to enable the 3D Mouse. The blue light on