User's Manual

RC240 3D Mouse Presenter V1.3
6
Start Using Presenter
The default mode entered is Basic mode that comes with the basic
functions. There are two more operation modes could be used:
Standard Mode: allows you to use Check/Line Marks and other
functions.
Advanced mode: allows you to use motions keys for more
commends.
Power ON the Presenter
Click the POWER key once to turn on the Presenter. The purple
light on the LASER key flashes once to confirm the ON status.
Power OFF the Presenter
Press and hold the POWER key for 3 seconds until the purple light
on the LASER key is lit. Release the POWER key. The purple
light on the LASER key flashes several times to confirm the OFF
status. If the Presenter is not working for 30 minutes, the Presenter will
be turned off automatically to save the battery power.
Use micro SD Card
Insert a micro SD card into the slot of the Receiver of RC132/611. You
may store the files into this memory.
Basic Mode
Please don’t forget to execute aimMaster™ Pro
(then the icon
is shown on the System Tray),
otherwise the Virtual Laser Pointer isn’t
operable.
Language
Right click the
aimMaster™ Pro icon ,
and click “Language” tab from pop-up
menu. You will see a dialogue window.
Select the language you prefer.
Exit
aimMaster™ Pro does not use many system resources. You may quit
this background application to release the memory when you don’t
need it. Right click the icon and click “Exit” from pop-up menu to
close aimMaster™ Pro .