User's Manual

RC240 3D Mouse Presenter V1.3
22
of your PowerPoint file is inactive. You should make this
window active by moving mouse cursor to this window and
make a left click. Then, clicking the POWER key will open the
Slide Show successfully.
Q. When I click POWER key to open the Slide Show of a
PowerPoint file, it always open the first page and could not start
from any middle page.
A. Your PowerPoint should be the old release, PowerPoint 2000
that does not support open Slide Show from middle page – it
always starts from the first page.
5. Advance Mode & Motion Keys
Q. Why I should use Advance Mode?
A. When you are becoming familiar with RC240 and would like to
have more function keys on this Presenter. You have the
flexibility to define up to 8 of your own software keys under
Advance Mode.
Q: When I use the Motion Key for PowerPoint, the computer does
not response.
A. The Motion Keys emulate the inputs from the keyboard. Try to
type in the hotkey from your keyboard. If it is working, then your
Motion key should be also working (of course, you should set
the correct key codes on the Hotkey Setting window in
advance).
There are several possible reasons if the Motion keys are not
functional.
(1) Your current window is inactive. Activate 3D Mouse by
clicking the LASER key. Move cursor to the window you are
trying to work and make a LEFT click to enable the
application window.
(2) If you had activated the input mode of your own language,
you should turn off it. E.g., in Traditional Chinese Windows,
if you turn on the Chinese Input Mode, even you type from
your keyboard directly, the hotkey does not work. In this
case, you should key in “Ctrl-Space” to turn off the Chinese
Input Mode. Then the Motion keys should work.