User's Manual

RC240 3D Mouse Presenter V1.3
18
From the Slide Sorter View, you may enable the 3D Mouse, select one of the Slides
that you want to show to the audiences, and then disable the 3D Mouse. To show
this page for the Slide Show, press and hold the RIGHT key to open the OSD. Move
the cursor to the left side to highlight the “Slide Show” block then release the RIGHT
key. The selected slide will be shown on the Slide Show.
Check Release Numbers
Right click the aimMaster™ Pro icon on the System Tray, select
“About” tab. A window is popped up and you will see the following
version numbers:
1.
aimMaster™ Pro Release Number.
2. Receiver Firmware Release Number.
3. Presenter Firmware Release Number.
The aim website is also shown on this “About” window.
2. Move Cursor
to this area
Slide Sorter View
Slide S Viewhow
The OSD over the Slid
e
1. Disable 3D Mouse
Press and hold the
RIGHT key
.
.
3. Release
RIGHT key
Slide S Viewhow
Slide Sorter View
The OSD over the Slide Sorter
2. Disable 3D Mouse
Press and hold the
RIGHT key
.
.
4. Release
RIGHT key
3. Move Cursor
to this area
1. Select this Slid
e