User's Manual

RC240 3D Mouse Presenter V1.3
16
View” accordingly.
Please check PowerPoint or other applications for the hotkey codes.
You may define your own hotkey code map and save it for your later
use.
When you enter all the codes on the dialog, click the “Save” button
and enter the filename to be saved. You may retrieve a Hotkey
Setting by clicking “Load” button and select one Hotkey Setting file
from the list.
You may modify the Hotkey codes by clicking the “Load” button to
select one of the Motion Key Map files.
Use the Motion keys
Before using the Motion keys, the 3D Mouse should be disabled (the
light of LASER key is turned OFF).
If you are using the Hotkey Setting as shown on the dialog of Page 14,
pressing & holding the RIGHT key, an OSD (On Screen Display) is
shown on the screen. You will see 8 blocks with the command letters
that were entered in the description column of the Hotkey Setting
dialog. Hold the Presenter RIGHT key and move the cursor towards
the direction of the command you want to execute. When the cursor is
moving out the OSD area, the selected command block is highlighted.
Release the RIGHT key. The Hotkey codes are sent out and the
application will respond with these codes.
Example 1:
Disable 3D Mouse. Press and hold the RIGHT key. When you move the
cursor (still hold the RIGHT key) to up position, the “Black” block will
be highlighted. Release the RIGHT key, the screen will go black
immediately.
Click UP or DOWN key to call back the screen from black.