User's Manual

RC240 3D Mouse Presenter V1.3
12
Plug & Present
A. Open Editor
Double click the
aimMaster
TM
Pro
icon on the
System Tray to
pop up the Open
Editor Window.
Click the Browse
button to enter up
to 3 paths of the
files to be
presented. You
may click the
Quick Guide tab or
Manual tab to read Quick Guide or User’s Manual.
B. Plug & Present
Plug the Receiver into the USB port of your
computer. The computer will automatically open
the files corresponding with the paths entered in
the Open Editor Window.
You may start the presentation then.
Change Laser Icon
In Standard Mode, you can change the Virtual Laser
icon by right clicking the aimMaster™ Pro icon
on the System Tray. Select “Load Laser Icon” tab
from the pop-up menu.
You will see a dialogue window as follows.
Choose one for your Laser Symbol, and press OK to
finalize this setting.
Press and hold LASER key
to test the selected icon.
You can also create your own
Laser icon by any graphic
bitmap editor, e.g.,
mspaint.exe. System can
accept the format as 128 x
128 and 256 colors in bitmap
file.
Click to read Quick Guide
Click to read User’s Manual