User's Manual

RC240 3D Mouse Presenter V1.3
10
In Check Mark or Line Mark
operation
Clear all marks
Press & Hold Scroll down
Click
In Check Mark operation, a Check Mark
is
placed.
In Line Mark operation, a red line is
drawn, the longer time you press, the longer
red line extends to the right.
OK
Press & Hold
Turn Presenter clockwise to increase the
system Volume, and turn Presenter
counter-clockwise to reduce the system
volume
Mouse Left key, only when 3D Mouse is
enabled.
LEFT Click
When 3D Mouse is disabled, the Timer will be
shown on the right corner of the screen.
RIGHT Click
Mouse Right key, only when 3D Mouse is
enabled.
Flashes Amber: Presenter is charging
Charging
Off: Presenter is Fully charged
Flashes Blue: when battery is between
100%~40% of full capacity.
LED on
LASER
key
Click any key
Flashes Amber: when battery is under 40% of
full capacity.
Place Check Mark
You can place red Check
Marks and draw Line Marks on
the screen to emphasis the
important parts.
Click
LASER key once to
activate 3D Mouse. Click
FEATURE key once to enable
the Check Mark. Move
Presenter to control the
position of the Check Symbol
cursor. Each click of OK key will place a
Check Mark on the screen.
Draw Line Mark
Click FEATUER key again to enable the Line
Mark. Press and hold OK key to draw the
red line. The longer time you press, the
longer red line extends to the right.