User's Manual

39
Q3. How can I reset my 802.11a
Wireless AP to factory default?
1. Follow these steps to perform a Factory Reset
using the Reset button on the back of the 802.11a
Wireless AP.
z With the unit on, press and hold the Reset
button with a pen or paper clip.
z Hold the reset button for about 10 seconds
until the Status LED on the front panel blinks
very quickly and then release.
z Wait a few seconds for the AP to reboot using
default settings.
2. A Factory Reset can also be performed through
the web configuration interface. Follow these
steps to perform a factory reset using the web
configuration interface.
z Log into the Wireless AP web configuration
interface.
z Click on the Reboot AP from the menu.
z Select “Yes” and click “Apply”.
3. You should reboot the AP to have the change take
effect.
Q4. What should I do if I forget my
password?
1. The only way is to restore factory configuration
to the Wireless AP. Please refer to question 3.