User's Manual

33
Remote Management
Remote Console
Secure Shell (SSH)
If enable Secure Shell, the Wireless Access Point will only allow remote access via Secure
Telnet.
SNMP
Enable SNMP to allow the SNMP network management software to manage the wireless
access point via SNMPv2 protocol.
Read Community Name: Allow the SNMP manager to read the MIB objects of the wireless
access point. The default setting is “public”.
Write Community Name: Allow the SNMP manager to write the MIB objects of the
wireless access point. The default setting is “private”.
IP Address to Receive Traps: The IP address of the SNMP manager to receive traps sent
from the wireless access point.
Click “Apply” if you make any changes.