User's Manual

22
Access Control
The Access Control allows you to restrict wireless access by MAC Address. This provides an
additional layer of security. Follow these steps:
1. In this Wireless Access Point’s left page, choose the Access Control option from the
Wireless Setup.
2. If you want to enable Access Control feature, click the check box next to “Turn Access
Control on”.
3. Select the desired Access Control Database: Local MAC Address Database and RADIUS
MAC Address Database.
Local MAC Address Database: The Access Point will use the local MAC address table
for Access Control.
RADIUS MAC Address Database: The Access Point will use the MAC address table
located on the external Radius server on the network for Access Control.
4. Then, either select form the list of available wireless stations that your Access Point has
found or enter the MAC address for each client. After enter the MAC Address, click
“Add” button in the MAC Address field to be managed.
5. Click “Delete” button if you wish to remove the MAC address from the list.
6. If you complete the settings, please click on “Apply” for changes to take effect.