User's Manual

17
3-3 Wireless Setup
Wireless LAN
The Wireless LAN Setup page lets you make changes to the wireless network settings. From
this window you can make changes to the wireless network name SSID, Broadcast SSID,
Wireless Mode, Channel/Frequency, Data Rate, and Output Power.
SSID: The SSID is a unique ID used by Access Points and Stations to identify a wireless
LAN. Wireless clients associating to any Access Point must have the same SSID. The default
SSID is “Wireless”. To change the SSID, type in the SSID you like to use. It is case sensitive
and must not exceed 32 characters.
Broadcast SSID: For security concern, you can choose not to broadcast your network’s SSID.
To turn off the broadcast of the SSID, click “No” check box next to “Broadcast SSID”. And
your Access Point will refuse the connection requests from whose are not aware the Network
ID. But certainly the Access Point can be easily connected well when you realize the Network
ID. The default setting is “Yes”.