Installation Instructions

AVAILABLE SIZES PART #
LINEALS
4" x 12' LN124
6" x 12' LN126
8" x 12' LN128
10" x 12' LN1210
FITTINGS
Coupling
4" XCPL4
(extruded
) 6" XCPL6
8" XCPL8
10" XCPL10
Coupling with Hole
6" COUP6
(molded)
8" COUP8
10" COUP10
90
o
Corner
4" CN904
(molded)
6" CN906
8" CN908
10" CN9010
45
o
Corner
4" CN454
6" CN456
8" CN458
10" CN4510
4" Outlet
4" OUT44
6" OUT46
8" OUT48
10" OUT410
4" Double Outlet
6" DOF46
8" DOF48
10" DOF410
Vertical 90
o
L
4" VL904
6" VL906
8" VL908
10" VL9010
ACCESSORIES
Grade Stake
18" GS018
30" GS030
Spacer Strap
4"d x 16"w SS416
For 4", 6", 8"
4"d x 20"w SS420
4"d x 24"w SS424
Spacer Strap
8"d x 20"w SS820
For 10"
8"d x 24"w SS824
Snap-in Adapter
4" fits all AD004
The properties, dimensions and weights of lineals and fittings listed here are subject to normal
manufacturing tolerances. This information is supplied for user reference only and is subject to
change without notice.
INSPECTION
All shipments from a North
American Specialty Products
plant must be inspected as soon
as possible after arrival. All North
American Specialty Products lineal
products are shipped in bulk
quantities. Extremely rough handling
en route may cause damage. Begin by
making an overall inspection of the load. Visual inspection should
indicate any apparent damage to the product. DO NOT discard
any damaged material. Set this material aside and submit claims
for any damage directly to the trucking company . Make a thorough
check to ensure every item on the packing list is received. Any
shortage must be shown on the signed receipt. Each bunk or
carton is marked to indicate the footage, size and type of product,
making it easy to check a mixed load. DO NOT throw cartons off
the truck; handle all material carefully at all times.
UNLOADING — FULL TRUCKLOADS
FAD is designed to withstand normal field conditions, but could
be damaged by careless handling. Lineals can be easily unloaded
in full bunks using mechanical equipment. Unload only one bunk
at a time. Unloading in full bunks is the preferred method since it
minimizes potential damage.
STORAGE
Store lineals on a flat surface and always in a horizontal position. If
product is to be stored for a prolonged period, it is recommended
that it be left in the original bunk packaging. If product is stored
outside, it must be covered with an opaque material for protection
from the sun’s rays, with adequate provision for air circulation.
Product must be stored away from excessive heat, because PVC
material can be temperature sensitive. Complete bunks of lineals
must be stored in the horizontal or flat direction, with slotted side
down and with equally spaced supports in at least three places
along the 12' length. At the job site, individual pieces must be
placed on a flat surface, out of direct sunlight.
EXPOSURE TO EXCESSIVE HEAT
Fittings are provided in cartons that shield the product from direct
sunlight. Should fittings be subjected to moderate heat, a slight
concave (inward) hourglass effect may occur. This does not affect
product performance in any way.
In the case of both lineals and fittings, it is important to avoid
storing in a high heat environment. Temperatures above 150˚-160˚F
will result in permanent distortion.
Store like this…
Not like this!
RECEIVING,
HANDLING AND STORING
CONSTRUCTION – FOOTING FORM/DRAINAGE
Note: Refer to local building codes/standards regarding construction regulations pertaining
to excavation, footing construction practices and foundation drainage requirements.
SYSTEM COMPONENTS
width
4"
8"
width
NEW
Ask your distributor for the new CertaForm
®
leave-in-place form – a perfect complement
to Form-A-Drain in one-sided drainage
applications.
North American
Specialty Products
Please visit us at www.naspecialtyproducts.com
855-624-7473 | www.naspecialtyproducts.com
North American Specialty Products
993 Old Eagle School Road, Suite 416
Wayne, PA 19087
© 2014 North American Specialty Products | Printed in the U.S.A.
Code No. 40-95-04L | Canadian Patent # 2,135,168 | Rev. 03/14