Installation Instructions

1 - Mark the location of THREE pilot holes for the Phillips Screws with Spacers using a
pencil, measuring tape, and level matching the dimensions shown in the diagram.
Locate holes in order to leave a 29/32” gap under the door. Drill pilot holes.
2 - Attach the Stops to the Track with the Bolts. Attach the Track to the cabinet,
using the Phillips Screws and Spacers. Make sure the Track is level before
tightening all the Phillips Screws.
3 - Drill pilot holes as shown and mount the
Hangers to the door with the Medium
Phillips Screws
4 - Place the door on the Track.
5 - Mark the proper location
for the Guide and drill
pilot holes for the
Short Phillips Screws,
removing the door from
the Track if necessary.
Attach Guide with Short
Phillips Screws and
return door to Track if it
was removed.
Rev-02Printed in China
2
2
3
1
4
2
1
Track
Hanger
Stops w/
Bolts
Guide
Phillips
Screw
Medium
Phillips
Screw
Short
Screws w/
Spacers
1
2
3
4
5
2”
2”
53
/64”
15
/64”
3
/4”
15
/16”
15
/16”
29
/32”
GAP
H
plus
1-
47
/64”
15-
63
/64” 15-
63
/64”
5
/64”
#8
Parts Included
Recommended Tools
DO NOT RETURN TO THE RETAILER
If you have any questions please contact Customer Care at
1-800-721-4191
M-F 8-5 Central Standard Time
IMPORTANT - READ ALL INSTRUCTIONS
BEFORE BEGINNING INSTALLATION.
36” Mini Rail
MEN0217
H
Door
Height