CUTTING PLOTTER Index: GSM167335 Set contains: Cutting plotter, power supply, manual Producer/Producent: TelForceOne S.A. Krakowska 119, 50-428 Wrocław, Poland Designed by Forever in EU, Produced in PRC Contents: 1. Cautions regarding use A: Safe use B: Description of signs and symbols 2. Accessories and machine parameters A: Kit contents B: Machine parameters 3. Machine product schematic A: Front of machine B: Back of machine C: Side of machine D: Machine power adapter 4.
5. Software operation A: The LOGO interface will be displayed when the machine is turned on. B: WIFI connection and entering the serial number C: Software use C1. Settings C2. How to cut 1. Cautions regarding use To ensure proper use of our cutting machine, follow the instructions given below. A: Safe use Warning Incorrect use may lead to injury to personnel. Incorrect operation can lead to damage to the machine.
will, and it is forbidden to excessively bend, pull, bind and press under the weight of the power cable. The power cord maybe damaged, resulting in electric shock or fire. 6.If the cutting machine is not used fora longtime, please unplug the power cord from the socket. Doing so may cause a fire. 7.When not in operation, keep your hands on the capstan and may cause injury. 2. Accessories and machine parameters A: Kit contents 1. One cutting machine 2. One knife holder set (including mounted blade inside) 3.
3. Machine product schematic Machine’s schematic diagram and description functions of each part A: Front of machine 1. LCD display (built in application, setting function) 2. Card slot (card slot in right, material plugged into position) 3. Platen roller (pressing film cutting material front and rear movement) 4. Knife holder (mounting blade, used for cutting materials) 5. Trolley (the left and right cutting of the machine and the loading of the upper and lower blades) B: Back of machine 6.
C: Side of machine 9. On-off button (short press to turn on, blue light will be on; about 3sec press to turn off) 10. Power connector (interface to connect to the machine's power adapter) D: Machine power supply 11. Power adapter (Power input AC 110-220V Power frequency voltage output 24V= 2,7A) 12.
4.Basic operation of the machine A: Knife holder assembly and adjustment Before the first use, the correct fixing of the handle consists in its free fall onto the mounting in the head after unscrewing the fixing screw. To keep the handle stable, tighten the screw firmly with your fingers. The knife holder has a total of 10 settings (in the order of 123456789AB). The larger the number on the handle, the longer the protruding tip of the knife, which allows for a deeper cut in the material.
B: Material placement Lower the roller levers to place the sheet in the machine correctly. Then place the sheet in the machine so that it is aligned to the right edge and in contact with the sheet slot. At the depth of the device, the sheet should be exactly behind the line placed on the machine. Sometimes it may happen that when cutting the film for a large telephone model, the sheet will slip out from under the pressing rollers, the solution is to place it deeper in the machine. 5.
Add A. During the first start-up, enter the serial number of the machine, which is located on the back of the device and begins with "FV........." B. WIFI connection and entering the serial number Add B. During the first run, we have the option of choosing the language of the device software. To start using the machine, you need to connect to the WIFI network and enter the serial number of the machine, which is located on the back of the machine and begins with "FV........". Then click login.
In the first setting point, we can change the speed and cutting force, plus additional settings, e.g. turning off the lamp in the machine. An additional option is the possibility of a test cut to check the correct setting of the cutting depth. Important: the cutting speed parameter should be set as low as possible because the lower the speed, the more accurate the cut. The second point is connecting to a WIFI network where we can change the access point.
with cover - a cut-out especially for customers using covers After selecting the appropriate cut, click send. Important: in the category of smartphones "General Category" and watches "Watch General Category" there are special universal cut-outs with cut-out dimensions. An additional cutting option is "Custom cutting" available in the main menu, it allows you to enter your own dimensions and rounding of angles to match individual needs.
ATTENTION The manufacturer is not responsible for the consequences of situations caused by improper use of the device or non-compliance with the recommendations. Double protection class The product is marked with the second protection class symbol. In devices of this protection class, safety in terms of electric shock is ensured by the use of appropriate insulation - double or reinforced - the destruction of which is very unlikely. For internal use only.
