Use and Care Manual

7
FAQ
BEAR™ mini BASICS
WHAT SHOULD I DO AFTER I RECEIVE MY BEAR™ mini DEVICE?
Congratulations on discovering smarter skincare! First things first - download the FOREO For You app for free, to unlock
and register your device. (For more information, please refer to the section below titled ‘THE APP’).
HOW DO I START MY FIRST TREATMENT?
First, clean and dry your face and neck carefully. Then apply FOREO’s SERUM SERUM SERUM to your skin, distributing it
evenly across all areas you wish to treat. Finally, select your preferred facial fitness routine in the app or follow the step-by-
step guide for Manual Mode, which can be found above or in the User Manual that came with your BEAR
™
mini device.
HOW DO I TURN MY BEAR™ mini DEVICE ON?
Press the universal button on your BEAR
™
mini device to turn it on. The indicator light will flash to let you know when
the device is in Bluetooth pairing mode.
HOW DO I TURN MY BEAR™ mini DEVICE OFF?
Press and hold the universal button for 3 seconds to turn off the device. After completing a pre-set routine, the device
will turn off automatically.
WHAT COMES WITH MY BEAR™ mini DEVICE?
1 BEAR
™
mini Device, 1 2ml Sample SERUM, 1 USB Charger Cable, 1 User Manual, 1 Quick Start Guide & 1 Stand.
THE BEAR™ DEVICE
HOW OFTEN CAN I USE MY BEAR™ mini DEVICE?
BEAR
™
mini is safe and gentle enough to use every day, either morning or night. We recommend using your BEAR
™
mini
once in a 24-hour period, for 2 minutes per treatment.
IS MICROCURRENT SAFE?
BEAR
™
mini’s microcurrent feature is a safe and painless toning technology solely when used with the required protective
serum for optimal conductivity. BEAR
™
mini must NEVER be activated near water or wet surfaces of any kind.
IS USING A HIGHER MICROCURRENT INTENSITY MORE EFFECTIVE?
Yes. A higher microcurrent intensity equals more power, which results in deeper penetration and more energy going
into your skin, making it more effective. However, everyone’s skin is different - which is why we recommend testing the
device out first (with SERUM SERUM SERUM), to see which microcurrent intensity is best for you.
CAN I ADJUST THE MICROCURRENT INTENSITY LEVEL?
Yes, you can manually adjust the microcurrent intensity by quick pressing the universal button once for each level, or by
selecting your preferred intensity through the app.
CAN I ADJUST THE INTENSITY OF THE T-SONIC™ PULSATIONS?
Yes, you can adjust the intensity of the T-Sonic
™
pulsations through the app. If you prefer your treatment without
T-Sonic
™
pulsations, you can double press the universal button on the device to turn T-Sonic
™
pulsations off.
WHAT IS THE DIFFERENCE BETWEEN BEAR™ & BEAR™ mini?
Both BEAR
™
& BEAR
™
mini deliver microcurrent to stimulate the face and neck, tightening and toning your skin for
an improved appearance. However, BEAR
™
mini has been designed with a more targeted facial workout in mind,
and therefore has small spheres to get into the small crevices of your face, as well as a lower range of 3 microcurrent
intensities. BEAR
™
, on the other hand, has medium-sized spheres to cover a larger surface area while also targeting
each line with precision care. BEAR
™
also offers a larger range of 5 microcurrent intensities, which are stronger than
those offered by BEAR
™
mini.
HOW ARE BEAR™ DEVICES DIFFERENT FROM OTHER AT-HOME MICROCURRENT DEVICES?
BEAR
™
devices are different from other at-home microcurrent devices in two very significant ways. Firstly, BEAR
™
devices
are the only at-home devices that feature Anti-Shock System
™
to eliminate any chance of the microcurrent shocking your
skin, making them the safest microcurrent devices in the world. Secondly, BEAR
™
offers a wider range of microcurrent
intensities than any other at-home device, allowing you to experience a more personalized and effective treatment.
HOW LONG DOES EACH PRE-SET MICROCURRENT TREATMENT LAST?
The routine times will vary from 1-3 minutes depending on which areas are being targeted.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
Model may be changed for improvements without notice.