Use and Care Manual

BATTERY REMOVAL

NOTE: This process is not reversible. Opening the device will void its warranty. This action must only be undertaken

when the device is ready to be disposed of.

Because this device contains a lithium-ion battery, the battery must be removed before disposal and should not be

thrown away with household waste. To remove the battery, open the inner plastic shell after removing silicone outer

layer and remove the battery to be disposed of in accordance with your local environmental regulations. Wear gloves

during this process for your safety. Detailed visual instructions are provided below:

Disclaimer: Users of this device do so at their own risk. Neither FOREO nor its retailers assume any responsibility or

liability for any injuries or damages, physical or otherwise, resulting, directly or indirectly, from the use of this device.

Furthermore, FOREO reserves the right to revise this publication and to make changes from time to time in the contents

thereof without obligation to notify any person of such revision or changes.

CAUTION: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE:

1) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

2) This device complies with CAN ICES-3 (B)/NMB-3(B). This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions:

• This device may not cause interference.

• This device must accept any interference, including interference that may cause undesired operation of the device.

SPECIFICATIONS

MATERIALS: Body-Safe Silicone, ABS, PC,

Chrome Plated Zinc Alloy

COLOR: Pink / Lavender

SIZE: 57x56x32mm

WEIGHT: 52g

BAT TERY: Li-ion 520mAh 3.7V

USAGE: Up to 90 uses per charge*

STANDBY: 90 days

FREQUENCY: 185 Hz

MAX NOISE LEVEL: <50dB

INTERFACE: 1- button

*Based on a 1-minute treatment time per use.