Installation Instructions

- 2 -
1
INSTALLING THE SHELVES
OPTIONAL
REMOVING THE DRAWER &
ADJUSTING THE LEG LEVERS
A
A
C
B
D
D
O Fully extend the drawer.
O Pull the two latches outward on the underside of the drawer to release the lock.
O Simultaneously tilt and lift the drawer upwards to pull it out of the vanity (A).
O If the floor is uneven, causing the vanity (A) to wobble, determine which foot needs to be adjusted in height.
O Carefully tilt the vanity (A) either backwards or forwards to access the leg leveler. Turn it clockwise to make the leg
shorter, or counterclockwise to make it longer.
O Repeat as needed with the other feet until the vanity (A) stands solidly on the floor.
O Insert the 8 shelf pins (D) into the 8 pre-drilled holes at the desired height inside the vanity (A) compartment.
O Slide the shelves (B) & (C) into the compartments above the pins (D).