Use and Care Manual
Carefully place the Chair Seat (B) on a non-abrasive flat surface. Align the holes on the Seat (B) with
holes on the Back (A) and secure with Bolts (CC) through Lock Washers (EE) and Flat Washers (DD).
DO NOT tighten bolts completely.
Fig 2
Align the holes on the chair side with holes on the Right Leg (F). Secure with Bolts (BB) through Flat
Washers (DD) and Bolts (CC) through Lock Washers (EE) and Flat Washers (DD).
DO NOT tighten bolts completely. Repeat the above step to assemble the Left Leg (E).
1
2
Fig 1
A
B
BB
DD
E
F
CC
DD
EE
CC
DD
EE