ITEM#: 504-900-K1 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Lemoore Deep Seating Set Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m.– 5:00p.m. EST, M-F Toll Free 1-855-390-5474 (Int.) 001-855-286-4931 Fax: (973) 428-8026 Website: www.foremostgroups.
Assembly Instruction for the Club Chair WARNING ! Chairs have a 250 lbs weight capacity. Hang cushion over chair frame to dry if it gets wet to prevent mold/mildew. Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly.
1 Attach the arm (A) to the left leg (B) with M6*40 bolt (F), M6 lock washer (J) and M6 washers (I) using socket wrench (K). The same operation to the arm (A) and the right leg (C). See figure 1. Fully tighten the bolts. A K B/C F J I Figure 1 2 Attach the back panel (D) to the seat panel (E) with M6*15 bolt (H), M6 lock washer (J) and M6 washers (I) using socket wrench (K). See figure 2. Do not fully tighten the bolts untill the end of step 3.
3 Align the arm and leg assembled in step 1 to the back panel and seat panel assembled in step 2. Secure the arm to the back panel with M6*15 bolt (H) M6 lock washer (J) and M6 washers (I), then the leg to the seat panel with M6*25 bolt (G), M6 lock washer (J) and M6 washers (I). See figure 3. Fully tighten the bolts when the bolts are in place. C K G J I E A B D H J I Figure 3 4 Turn the chair upright. Put the seat cushion (L) and the back cushion (M) on the chair. See figure 4.
Assembly Instruction for the Loveseat WARNING ! Loveseat have a 500 lbs weight capacity. Hang cushion over chair frame to dry if it gets wet to prevent mold/mildew. Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly.
1 Attach the arm (A) to the left leg (B) with M6*40 bolt (F), M6 lock washer (J) and M6 washers (I) using socket wrench (K). The same operation to the arm (A) and the right leg (C). See figure 1. Fully tighten the bolts. A B/C K F J I Figure 1 2 Attach the back panel (D) to the seat panel (E) with M6*15 bolt (H), M6 lock washer (J) and M6 washers (I) using socket wrench (K). See figure 2. Do not fully tighten the bolts untill the end of step 3.
3 Align the arm and leg assembled in step 1 to the back panel and seat panel assembled in step 2. Secure the arm to the back panel with M6*15 bolt (H) M6 lock washer (J) and M6 washers (I), then the leg to the seat panel with M6*25 bolt (G), M6 lock washer (J) and M6 washers (I). See figure 3. Fully tighten the bolts when the bolts are in place. C K G J I E A B D H J I 4 Turn the chair upright. Put the seat cushion (L) and the back cushion (M) on the chair. See figure 4.
CARE & MAINTENANCE Clean furniture frame with wet towel using mild soap and water solution. Dry completely with soft towel. Clean cushions and sling seat material with a mild solution of soap and water and hang cushions to drip dry completely. Store them in a clean dry area of your home. Do not machine wash or dry. Do not use bleach or strong solvents to clean any of your patio furniture. It will harm both fabrics and metal finishes.
WARRANTY EXCLUSIONS Failure caused by unreasonable or abusive use.
