Warranty

Place the chair seat (A) on a non-abrasive flat surface. Align the holes on the support bar
on the underside of the chair seat with the holes on the spring plates which are pre-attached to
the chair base. Insert bolts (H) through the C-clamp alum plates (L), and support bar attached
to the underside of the seat, and spring plates attached to the U support bar (D) as shown in
the diagram.
Secure bolts with flat washers (J), lock washers (I) and nuts (K). The support bar and spring
plate should be sandwiched in between the alum plates (L).
Warning: Improper assembly may result in serious personal injury.
A
Figure 3
3
D
B
K
I
J
STEP
STEP
H
L
U Shape Bar
C