Warranty

P
A
A
C
B
I
M
L
H
L
M
Place fully assembled
base on table top (A).
Align the attachment holes in
Base (B) with the holes in
table top (A). Loosely secure
base support (B) to table top
(A) by the bolts (I) through
lock washers (M), flat
washers (L), using wrench
(N). Align the holes in the
pedestal (C) with the holes in
the table top (A). Loosely
secure pedestal (C) to table
top (A) by the bolts (H)
through lock washers (M), flat
washers (L), using wrench
(N). As shown in figure 3.
DO NOT TIGHTEN BOLTS
AT THIS POINTS.
3
Check the alignment of all table
base, and adjust if necessary.
Once the alignment is correct and all
bolts are in place, tighten all bolts.
With the help of another person,
carefully turn the table to the upright
position.
Put the umbrella cover (P) on it.
As shown in figure 4.
The table is ready for your enjoyment.
4
Figure 3
Figure 4