Warranty

B
C
E
K
J
B
C
F
K
J
D
G
L
M
Remove all protective
material carefully.
Avoid cutting the surface of
the furniture while removing
the packaging material.
Carefully turn the Pedestal
(C) upside down on a soft
surface. Align the holes in
the Base Support (B) with the
attachment holes in the
Pedestal (C). Loosely secure
Base Support (B) to Pedestal
(C) by the bolts (E) through
lock washers (K), flat
washers (J), using Allen
wrench (O). As shown in
figure 1.
DO NOT TIGHTEN BOLTS
1
Place X-Base (D) on the assembled Base Support in Figure 1. Align the attachment holes in X-Base (D) with the
holes in the Pedestal (C). Loosely secure Base (D) to Pedestal (C) with bolts (G) through lock washers (M), flat
washers (L), using wrench (N). Align the holes in the Base (D) with the attachment holes in base support (B). Loosely
secure X-Base (D) to base support (B) with bolts (F) through lock washers (K), flat washers (J), using Allen wrench (O).
As shown in figure 2.
DO NOT TIGHTEN BOLTS AT THIS POINTS.
2
Figure 1
Figure 2