KIT#: 502900K2 ITEM#: 50200232ET01 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Tanglewood Swivel Rocking Chair Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m.– 5:00p.m. EST, M-F Toll Free : 1-800-443-1410 (USA) Fax: (973) 428-8026 www.foremostgroups.
WARNING! • Failure to tighten bolts may cause injury. Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly. Place the chair on a non-abrasive flat surface to prevent scratching.
Remove all protective material carefully. Avoid cutting the surface of the furniture while removing the packaging material. Place the chair seat (A) on a non-abrasive flat surface. Align the holes on the support bar on the underside of the chair seat with the holes on the spring plates attached to the t-rocker that is pre-attached to the chair base (B). Make sure the arrow labels on the rocker mechanism and chair support bar are facing the same direction—towards the front of the chair.
CARE & MAINTENANCE Clean furniture frame with wet towel using mild soap and water solution. Dry completely with soft towel. Clean cushions and sling seat material with a mild solution of soap and water and hang cushions to drip dry completely. Store them in a clean dry area of your home. Do not machine wash or dry. Do not use bleach or strong solvents to clean any of your patio furniture. It will harm both fabrics and metal finishes.
WARRANTY EXCLUSIONS Failure caused by unreasonable or abusive use.
KIT#: 502900K1 ITEM#: 50248632E008 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Tanglewood 48 Round Dining Table Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m.– 5:00p.m. EST, M-F Toll Free : 1-800-443-1410 (USA) Fax: (973) 428-8026 www.foremostgroups.
WARNING! • Failure to tighten bolts may cause injury. Please read instructions carefully and thoroughly before assembling. Check parts against the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly. Place the table on a non-abrasive flat surface to prevent scratching.
Remove all protective material carefully. Avoid cutting the surface of the furniture while removing the packaging material. Carefully turn the Pedestal (C) upside down on a soft surface. Align the holes in the Base Support (B) with the attachment holes in the Pedestal (C). Loosely secure Base Support (B) to Pedestal (C) by the bolts (E) through lock washers (K), flat washers (J), using Allen wrench (O). As shown in figure 1.
Place fully assembled base on table top (A). Align the attachment holes in Base (B) with the holes in table top (A). Loosely secure base support (B) to table top (A) by the bolts (I) through lock washers (M), flat washers (L), using wrench (N). Align the holes in the pedestal (C) with the holes in the table top (A). Loosely secure pedestal (C) to table top (A) by the bolts (H) through lock washers (M), flat washers (L), using wrench (N). As shown in figure 3.
CARE & MAINTENANCE Clean furniture frame with wet towel using mild soap and water solution. Dry completely with soft towel. Clean cushions and sling seat material with a mild solution of soap and water and hang cushions to drip dry completely. Store them in a clean dry area of your home. Do not machine wash or dry. Do not use bleach or strong solvents to clean any of your patio furniture. It will harm both fabrics and metal finishes.
WARRANTY EXCLUSIONS Failure caused by unreasonable or abusive use.
