Use and Care Manual

Table Of Contents

Parts

Check and make sure you get the components on the list, contact us for any missing

1 : Allen Bolt M6 x 30mm

2 : Allen Bolt M6 x 40mm

3 : Flat Washer

4 : Allen Key

2 Pcs

16 Pcs

4 Pcs

20 Pcs

2 Pcs

I : Seat Cushion

C : Back Frame

D : Seat Frame

E : Front Frame

F : Bottom Frame

H : Table Glass

G : Table Frame

Notice:

3. Tighten up all screws with tools gradually.

the assembly process.

5. If the item is not stable, please loosen all the screws,

adjust it on a ﬂat ground and tighten up all screws again.

6. Note : If one or some screws are fully tightened during

assembly, chances are the others will not be aligned with

holes. In addition, all the holes are designed to be relatively

larger to provide more space for the adjustment of the

screws.

1. 50% Tighten before ﬁxing all screws, Allen wrench is

recommended instead of an electric drill.

2. Place the item on a ﬂat ground to adjust and make sure

it remains stable.

4. If the screws are not aligned with holes during assembly,

please loosen all the other screws to 50% and continue

B : Left Armrest

A : Right Armrest

1 Pc