ASSEMBLY INSTRUCTIONS Rattan Love Seat If you have any assembly problem Contact us via email: hofficeservice@gmail.com for more information.
Parts Check and make sure you get the components on the list, contact us for any missing A : Right Armrest 1 Pc B : Left Armrest 1 Pc 1 Pc C : Back Frame G D : Seat Frame C B H I A 1 Pc E : Front Frame 1 Pc D I F : Bottom Frame 1 Pc G : Table Frame 1 Pc H : Table Glass 1 Pc I : Seat Cushion 2 Pcs E F Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable.
Installation step For successful installation, When installing, please do not tighten the screws once, when the screws are all installed, a unified tightten all the screws 50% A C 3 1 1 Step 1: Connect Right Armrest (A) & Back Frame (C), tighten Bolt (1), Flat Washer (3) with Allen Key (4). 50% B 1 1 3 Step 2: Connect The Part from Step 1 & Left Armrest (B), tighten Bolt (1), Flat Washer (3) with Allen Key (4).
Installation step Tips : DO NOT tighten any screws until all the parts are put together. 50% 3 2 D 2 1 1 1 1 3 Step 3: Connect The Part from Step 2 & Seat Frame (D), tighten Bolt (1), (2), Flat Washer (3) with Allen Key (4). 3 50% 2 2 Step 4: Connect The Part from Step 3 , tighten Bolt (2), Flat Washer (3) with Allen Key (4).
Assembly steps Tips : DO NOT tighten any screws until all the parts are put together. 1 50% 3 1 1 1 1 3 E Step 5: Connect The Part from Step 4 & Front Frame (E), tighten Bolt (1), Flat Washer (3) with Allen Key (4). 1 50% 3 1 1 F Step 6: Connect The Part from Step 5 & Bottom Frame (F), tighten Bolt (1), Flat Washer (3) with Allen Key (4).
Assembly steps Tips : DO NOT tighten any screws until all the parts are put together. 50% 3 1 1 G Step 7: Connect The Part from Step 6 & Table Frame (G), tighten Bolt (1), Flat Washer (3) with Allen Key (4). 50% 3 2 2 Step 8: Connect The Part from Step 7 , tighten Bolt (2), Flat Washer (3) with Allen Key (4).
Assembly steps Tips : DO NOT tighten any screws until all the parts are put together. 100% H I I Step 9: Put the Chair upright and make sure all legs are level, then firmly tighten Bolts with Allen Key (4), Put on Table Glass (H) & Seat Cushion (I) to love seat.
Dear Customers Yours sincerely 7