User Guide

Recording the keycode

You will be provided with a keycode card when you take delivery of your

vehicle. Keep the card in a safe place, but not inside your vehicle.

If you lose the keycode, contact your Ford Dealer and supply details of

your audio unit along with some proof of identity.

To enter a keycode

If you turn on the audio unit and

CODE flashes in the display, you

must enter a keycode before the

unit is operational.

Use the station preset controls to enter your keycode.

1. Press the 1 memory preset

control until the correct first digit of

the keycode is shown in the display.

2. Press the preset controls 2, 3 and

4 in the same way for the remaining

digits until the complete correct

keycode is shown.

3. Press the preset control 5 to

enter the keycode. The audio unit will then operate.

If an incorrect number is entered

Ford audio units accept up to TEN keycode entry attempts. A numeral

in the display shows the number of attempts made.

If an incorrect number is entered, the display reverts to CODE and

another entry attempt may be made.

• If WAIT 30 appears, wait until the

time counts down to zero. When

CODE is displayed again, try to

enter the keycode.

Controls and features