User Guide

• 4.6L V8 engine
1. Start the engine and let it run until it reaches normal operating
temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).
2. While the engine idles, turn the steering wheel left and right several
times.
3. Turn the engine off.
4. Check the fluid level in the reservoir.
5. The fluid level should be between the MIN and MAX lines. Do not add
fluid if the level is in this range.
6. If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the correct operating range. Be sure to put the
cap back on the reservoir.
TRANSMISSION FLUID
Checking automatic transmission fluid (if equipped)
Refer to your service guide for scheduled intervals for fluid checks and
changes. Your transmission does not consume fluid. However, the fluid
level should be checked if the transmission is not working properly, i.e.,
if the transmission slips or shifts slowly or if you notice some sign of
fluid leakage.
Transmission fluid should be checked and, if required, fluid
should be added by a Ford Dealer.
Maintenance and care
207