User Guide

Units (English/Metric)

1. Select this function from the

SETUP menu for the current units

to be displayed.

2. Press the RESET control to

change from English to Metric.

System check

Selecting this function from the

SETUP menu causes the message

center to cycle through each of the

systems being monitored. For each

of the monitored systems, the

message center will indicate either an OK message or a warning message

for three seconds.

Pressing the RESET control cycles the message center through each of

the systems being monitored.

The sequence of the system check report is as follows:

1. oil life in XX%

2. oil pressure

3. engine temp

4. charging system

5. washer fluid level

6. brake fluid level

7. fuel level

Instrumentation