User Guide

1. Insert the first previously

programmed coded key into the

ignition and turn the ignition from 2

(ACC) to 3 (ON) (maintain ignition

in 3 (ON) for at least one second).

2. Turn ignition to 1 (LOCK) and

remove the first coded key from

the ignition.

3. Within ten seconds insert the

second previously programmed

coded key into the ignition and turn the ignition to 2 (ACC) then to 3

(ON) (maintain ignition in 3 (ON) for at least one second but no more

than ten seconds).

4. Turn the ignition to 1 (LOCK) and remove the second coded key

from the ignition.

5. Within 20 seconds insert the new unprogrammed key (new key/valet

key) into the ignition and turn the ignition to 2 (ACC) then to 3 (ON)

(maintain ignition in 3 (ON) for at least one second). This step will

program your new key to a coded key.

6. To program additional new unprogrammed key(s), repeat this

procedure from step 1.

If successful, the new coded key(s) will start the vehicle’s engine and the

theft indicator will illuminate for three seconds and then go out.

If not successful, the new coded key(s) will not start the vehicle’s engine

and the theft indicator will flash on and off and you may repeat steps 1

through 6. If failure repeats, take your vehicle to an Authorised Ford

Dealer to have the new spare key(s) programmed.

Controls and features

100