Operation Manual

2. Slacken the lug nuts.
3. Jack up the vehicle until the tire is clear
of the ground.
4. Remove the lug nuts and the wheel.
Installing a Road Wheel
WARNINGS
Use only approved wheel and tire
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Using Snow Chains (page 257).
Do not fit run flat tires on vehicles
that were not originally fitted with
them. Please contact an authorized
dealer for more details regarding
compatibility.
WARNING
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Note: The lug nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the lug
nuts are against the wheel.
1. Install the wheel.
2. Install the lug nuts finger tight.
3. Install the locking lug nut key.
4. Partially tighten the lug nuts in the
sequence shown.
5. Lower the vehicle and remove the jack.
6. Fully tighten the lug nuts in the
sequence shown. See Using Snow
Chains (page 257).
7. Install the wheel trim using the ball of
your hand.
WARNING
Have the lug nuts checked for
tightness and the tire pressure
checked as soon as possible.
268
C-MAX (CEU) Vehicles Built From: 16-03-2015 Vehicles Built Up To: 19-07-2015, CG3642en enGBR, Edition date: 02/2015, First Printing
Wheels and Tires