Operation Manual

WARNING
If it still fails to release, do not use
the tow bar and have it checked by
a properly trained technician.
Swivelling the Tow Ball Arm Out
Move the tow ball arm to the operating
position. The tow ball arm automatically
locks in the operating position. The locking
process is clearly audible and the warning
tone will stop.
Swivelling the Tow Ball In
WARNING
Before swivelling the tow ball arm in,
always unhitch the trailer or
dismantle load carriers and their
attachments. Dismantle attachments for
tracking stabilization. Remove the plug for
the trailer power supply and the adapter
from the socket. Failure to do so may result
in damage to the bumper.
1. Release the tow ball arm. See releasing
the tow ball arm.
2. The tow ball arm automatically swivels
into the lowered position.
3. Move the tow ball arm to the stop in
the stowed position. The tow ball arm
automatically locks in the stowed
position. The locking process is clearly
audible and the warning tone will stop.
Fault Conditions
If the tow ball arm release button is
illuminated or you hear a warning tone
when the ignition switch is in position II,
repeat the release process.
If you pull on the tow ball arm during the
release process, the system will stop
moving to prevent an overload condition.
To reset the system, press the release
button for 15 seconds.
193
C-MAX (CEU) Vehicles Built From: 16-03-2015 Vehicles Built Up To: 19-07-2015, CG3642en enGBR, Edition date: 02/2015, First Printing
Towing