Operation Manual

Retractable Tow Ball - Electrically
Operated
You will hear a warning tone when the tow
ball arm is not in one of the locked
positions. The warning tone will switch off
after 30 seconds. If you do not hear the
tone when moving the tow ball arm or at
system activation, do not use the tow bar
and have it checked by a properly trained
technician.
Only move the tow ball arm with your
hand. Never use your foot or auxiliary tools
as damage to the mechanism may result.
A 13-pin trailer socket A is provided
underneath the rear bumper next to the
tow ball arm B.
Releasing the Tow Ball Arm
Do not touch the tow ball arm during the
release process.
Note: If the release process is interrupted,
for example an obstacle in the way or loss
of power supply, the system will need to be
reset. To reset the system, repeat the
release process.
Note: The lamp in the switch illuminates
when the system is activated.
The following conditions must be met
before releasing the tow ball arm:
• The luggage compartment lid must be
open.
• The ignition must be off.
• No plug must be attached to the 13-pin
trailer socket.
• The battery voltage must be greater
than 11 volts.
1. Press the button until it illuminates to
activate the system.
2. Press the button again within four
seconds to release the tow ball arm.
The tow ball arm automatically swivels
into the lowered position.
If the tow ball arm fails to release, press
the button again for 15 seconds.
192
C-MAX (CEU) Vehicles Built From: 16-03-2015 Vehicles Built Up To: 19-07-2015, CG3642en enGBR, Edition date: 02/2015, First Printing
Towing