Operation Manual

Programming the Once Function
Selecting this function allows you to
program one heating cycle for one specific
day.
Set the time you want your vehicle to be
warm and ready to drive. Use the
information display controls on the
steering wheel. See Information
Displays (page 80).
1. Highlight the time at the top of the
menu and press the OK button. The
hours start to flash.
2. Set the hours using the up and down
arrow buttons.
3. Press the right arrow button. Set the
minutes using the up and down arrow
buttons. Press the OK button.
Switching Programmed Functions Off
Use the information display controls on
the steering wheel. See Information
Displays (page 80).
To switch the programmed functions off, scroll to:
Action and DescriptionMessage
Press the OK button.Settings
Press the OK button.Vehicle settings
Press the OK button.Park heater
Select one of the following:
Uncheck the active programmed heating cycles as required.Time 1
Uncheck the active programmed heating cycles as required.Time 2
Uncheck the active programmed heating cycles as required.Once
Switching the Heat Now Function On
WARNING
Do not use the fuel operated parking
heater at fuel filling stations or near
sources of combustible vapors, dust
or in enclosed spaces. This could result in
serious personal injury or death.
Selecting this function allows you to switch
the system on immediately.
Use the information display controls on
the steering wheel. See Information
Displays (page 80).
101
C-MAX (CEU) Vehicles Built From: 16-03-2015 Vehicles Built Up To: 19-07-2015, CG3642en enGBR, Edition date: 02/2015, First Printing
Climate Control