Operation Manual

PRINCIPLE OF OPERATION
Electronic Stability Program
WARNING
The system does not relieve you of
your responsibility to drive with due
care and attention. Failure to do so
could result in loss of vehicle control,
personal injury or death.
Without ESPA
With ESPB
The system supports stability when your
vehicle starts to slide away from your
intended path. The system performs this
by braking individual wheels and reducing
engine torque as required.
The system also provides an enhanced
traction control function by reducing
engine torque if the wheels spin when you
accelerate. This improves your ability to
pull away on slippery roads or loose
surfaces, and improves comfort by limiting
wheel spin in hairpin bends.
Stability Control Warning Lamp
While driving, it flashes when the system
is operating. See Warning Lamps and
Indicators (page 58).
USING STABILITY CONTROL
Note: The system automatically switches
on every time you switch the ignition on.
You can switch the system on and off using
the information display. See General
Information (page 63).
111
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Stability Control