Hub/Switch Configuration Guide

show port-channel summary
SFTOS Command Reference for the S2410, Version 2.4.1.0 257
Admin Mode—May be enabled or disabled. The factory default is enabled.
Link Trap Mode—This object determines whether or not to send a trap when link status changes. The
factory default is enabled.
STP Mode—The Spanning Tree Protocol Administrative Mode associated with the port or port channel
(LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
Mbr Ports—A listing of the ports that are members of this port channel (LAG), in
unit/slot/port
notation. There can be a maximum of eight ports assigned to a given port channel (LAG).
Port Speed—Speed of the port channel port.
Type—This field displays the status designating whether a particular port channel (LAG) is statically or
dynamically maintained.
Static - The port channel is statically maintained.
Dynamic - The port channel is dynamically maintained.
Active Ports—This field lists the ports that are actively participating in the port channel (LAG).
show port-channel summary
Display the static capability of all LAGs on the device as well as a summary of individual LAGs.
Syntax
show port-channel
Mode
Privileged Exec
Static Capability—whether the device has static capability enabled.
port channel/LAG Summary:
Lag Name—The name of the lag.
Link State—Indicates whether the Link is up or down.
Mbr Ports—A listing of the ports that are members of this lag, in slot.port notation.
Active Ports—A listing of ports that are actively participating in the LAG.