Pseries Installation Guide

P-Series Installation and Operation Guide, version 2.3.1.2 93
pnic linkdown
Disable the physical link.
Syntax
pnic linkdown [number] [channel]
Enable a physical link using the command pnic linkup.
Parameters
Command
History
Example
Figure 57
[root@localhost SW]# pnic linkdown
No card number specified. Assuming card 0
No channel number specified. Assuming channel 0
Card 0, Channel 0 is down.
[root@localhost SW]#
pnic linkdown Command Example
Related
Commands
pnic linkup
Enable the physical link.
Syntax
pnic linkup [number] [channel]
Disable a physical link using the command pnic linkdown.
number
Enter the number of the network interface card.
Range: 0-5
Default: 0
channel
Enter the channel number
Range: 0-1
Default: 0
Version 2.0.0.1 Introduced
pnic linkup Enable the physical link ports.