Pseries Installation Guide

P-Series Installation and Operation Guide, version 2.3.1.2 29
To modify dynamic rules:
Figure 15 Editing Dynamic Rules in vi
fn90000012
pnic
Managing Capture/Forward Policies with the GUI
Upon compiling static and dynamic rules, default capture/forward policies are assigned to each rule.
To change capture/forward policies:
Step Task
1
Enter the m command from the GUI command line (see “GUI Commands” on page 26) to access the
main rule management GUI (see Figure 14).
2Select Edit Rules to invoke the vi editor (see Figure 15).
3 Add, delete, alter, or uncomment rules using vi commands (see Appendix D , on page 125).
4 You are prompted to confirm your changes upon exiting the editor.
Step Task
1
Enter the m command from the GUI command line (see “GUI Commands” on page 26) to access the rule
management GUI (see Figure 14).
2Select Manage Rules to access the policy management menu (see Figure 16).
3 Use the arrow keys to highlight a rule and the Select option, and press the Enter key.
4Select alert, permit, divert or deny, based on the descriptions in Table 5 (also see Figure 17).
5 Exit the menu by selecting Done, and repeat Steps 3 through 5 for other rules, if desired.
6Select Done; you are prompted to confirm your changes.