Pseries Installation Guide

P-Series Installation and Operation Guide, version 2.3.1.2 113
Example
Figure 80
[root@localhost SW]# pnic temp-mem-enable
No card number specified. Assuming card 0
*** Enabling temporary memory on card:0 successful.
[root@localhost SW]#
pnic temp-mem-enable Command Example
Related
Commands
pnic updatemacvalue
Specifies an LSB value for a particular hash index.
Syntax
pnic updatemacvalue [number]
Parameters
Command
History
Example
Figure 81
[root@localhost SW]# pnic updatemacvalue
No card number specified. Assuming card 0
Please input the hash index [0-255]: 56
The value to replace: 0x78
The MAC address updating is done on register 0x4e0 - index:56
[root@localhost SW]#
pnic updatemacvalue Command Example
Related
Commands
Usage
Information
Use this command with the MAC rewrite feature.
pnic temp-mem-disable Disable temporary memory.
number
Enter the number of the network interface card.
Range: 0-5
Default: 0
Version 2.1.0.0 Introduced
pnic macrewrite-on Enable MAC rewriting.
pnic macrewrite-off Disable MAC rewriting.
pnic updatemacvalue Obtain or assign a MAC LSB hash index value.