Manualshelf

Service Manual

ManualsBrandsFORCE Technology ManualsInstrumentsSubsea CP inspection of flowlines, pipelines, jacket and similar structures
25262728293031323334
o Between motor housing and electronics housing
2. Check for damage to cables and connectors. Any damaged cable must be replaced. Failure to replace
damaged cables can result in damage to the sensor and loss of function of the sensor. Contact FTN for
replacement cables.
3. Check that no bolts are loose. M3 bolts shall be tightened to 1.8Nm and M4 bolts shall be tightened to
4.3Nm in the lid and 3.5Nm to the motor housing.
Oil filled hose
Check for oil