Service Manual

Equipment ratings
FiGS 2.0 sensor:
Supply voltage: 24VDC
Supply current: 3A
Maximum power consumption: 72W
Typical power consumption: 20W
Over Voltage Category I
Data connection: RS 485 full duplex
Connector spec: Transmark TS-FCR-08P-MING-3S
Temperature: -15 / +50C
Pressure 3000MSW / 300barg
Matings +500
Isolation 1000V
Rated voltage 600VDC
Rated current 3.5A
Indoor and outdoor use
Altitude 4000m
Depth 3000m seawater / 300barg
Temperature In air: -15 / 40C
In water: 0 / 40C
Relative humidity: 100%
Contains oil: Panolin HLP SYNTH 15
https://www.panolin.com/
Pollution Degree 2
Dimensions incl. bracket Ø90 x 461mm
Weight in air 5kg
Weight in seawater 2.5kg