User Manual

9
More information is available at www.force-rc.
com for advanced settings and adjustments for
your FORCE helicopter and transmitter.
The FORCE helicopter comes with an adjustable
swashplate for advanced pilots. Move lower rotor
head links from the shorter to the longer set of
inner swashplate control balls (see illustration).
This change provides increased helicopter re-
sponse for flying against drafts or air movement.
Note: Always attach links to control balls opposite
each other.
Advanced Swashplate Settings
ST1.2 x 5 (1)
EFLH2401
ST1.2 x 5 (2)
M0.8 x 2.5 (4)
M1.2 x 2.5 (2)
M1.2 x 2.5 (2)
M1.2 x 1.8 (2)
M1.2 x 1.8 (3)
M0.8 x 2.5 (8)
M1.2 x 2.5 (2)
ST1.2 x 5 (7)
ST1.2 x 5 (2)
ST1.2 x 5 (2)
ST1.2 x 5 (5)
EFLH2409
EFLH2410
EFLH2418
EFLH2219B
EFLH2427
EFLH2404
EFLH2416
EFLH2412
EFLH1066
EFLH2421
EFLH2420
EFLH2211
EFLH2213
EFLH2214
EFLH2215
EFLH3021
EFLHB1501S
EFLH2225
EFLH1067
EFLB1201S
EFLH2217
EFLH2222
EFLH2424
Short Swashplate Control Balls
Anti-rotation
pin
Long Swashplate Control Balls
The transmitter and helicopter in the box are bound together at the factory. Re-binding is for transferring helicopter
control between transmitters or restoration after accidental loss of binding.
Re-Binding your FORCE Helicopter
1
5
2
3
4
Fully Charged
OFF
ON
A
B
6
8
Flashes
10 Flashes
Solid
10 Beeps
Flashes
7
Wait
5 seconds
5–10
seconds
Installing Optional 150mAh Flight Battery
Before installing an optional
150mAh flight battery, install short
tubing on the battery. This will
keep installation of this battery
(longer than the 120mAh battery)
from interfering with flight opera-
tion.
1
2
150mAh Battery
Do not move for
5-10 seconds
3