User Manual

8
FORCE Operations Setup Mode
Press and Release Right Fire
Button to change Range
Green LED: Accepts any hits.
Blue LED: Accepts hits only from
Red and Green teams.
Red LED: Accepts hits only from
Blue and Green teams.
Press and Release Left Fire
Button to change Team Color
Push stick down into case
until it clicks
SimpliFly: 2 beeps at stick push.
Transmitter LED blinks.
Standard: 1 beep at stick push.
LED solid light.
LED
Beeps
Low: Up to 10-foot (3m) range
LED blinks slowly
High: Up to 20-foot (6m) range
LED blinks rapidly
Range Limit Function
Press and Release Right Fire
Button to change Range
Green LED: Accepts any hits.
Blue LED: Accepts hits only from
Red and Green teams.
Red LED: Accepts hits only from
Blue and Green teams.
Press and Release Left Fire
Button to change Team Color
Push stick down into case
until it clicks
SimpliFly: 2 beeps at stick push.
Transmitter LED blinks.
Standard: 1 beep at stick push.
LED solid light.
LED
Beeps
Low: Up to 10-foot (3m) range
LED blinks slowly
High: Up to 20-foot (6m) range
LED blinks rapidly
Team ID Function
Press and Release Right Fire
Button to change Range
Green LED: Accepts any hits.
Blue LED: Accepts hits only from
Red and Green teams.
Red LED: Accepts hits only from
Blue and Green teams.
Press and Release Left Fire
Button to change Team Color
Push stick down into case
until it clicks
SimpliFly: 2 beeps at stick push.
Transmitter LED blinks.
Standard: 1 beep at stick push.
LED solid light.
LED
Beeps
Low: Up to 10-foot (3m) range
LED blinks slowly
High: Up to 20-foot (6m) range
LED blinks rapidly
SimpliFly Mode
2
Connect Flight Battery.
1
Push Left Control to Full.
Before ESC arms (5 seconds),
Press and hold Left Fire Button and
push Transmitter switch ON
.
3
Push Left
Control Stick
to Low.
To Save settings
and Exit Setup Mode
4
Helicopter: slow, double blinking
blue LED
Transmitter: continuous gunfire sound,
blinking LED
Hold Fire for
8 Seconds
2
Connect Flight Battery.
1
Push Left Control to Full.
Before ESC arms (5 seconds),
Press and hold Left Fire Button and
push Transmitter switch ON
.
3
Push Left
Control Stick
to Low.
To Save settings
and Exit Setup Mode
4
Helicopter: slow, double blinking
blue LED
Transmitter: continuous gunfire sound,
blinking LED
Hold Fire for
8 Seconds
Note: If heli LED is
blinking rapidly after
step 3, unplug the flight
battery and try again.
Save and Exit
Default: Long Range Default: Green
Default: SimpliFly disabled
Your helicopter is ready for battle when you open the box. Factory settings are standard flight (not SimpliFly), Green
team (rogue or free-for-all), and long range (20 feet (6m)). Only when you want to change these battle settings is
FORCE Operations Setup Mode required.