Owner's Manual

EN-4
Step 2: Setting the time format.
Press and release M to select the desired time format --- 12h or
24h. Press SET.
Step 3: Setting the time.
With the hour ashing, press M until the correct hour appears.
Press SET.
With the minute ashing, press M until the correct minute
appears. Press SET.
Step 4: Deleting the memory.
With “dEL” and “ ” symbol on the display, press M and select
“no” to keep the results in memory then press SET to skip.
To delete all the results, press M and select “YES”. Then press SET
button to delete all memory. “OK” is displayed in themeter, which
indicates that all data stored is deleted.
BATTERY
SET
CR2032
Step 5: Setting the reminder alarm.
You may set up any or all of the reminder alarms (1-4). The meter
displays “On” or “OFF” and “
” , press M to turn on or turn o to
set the rst reminder alarm.
Press M to select “On”, then press SET to set the hour. When the
hour is ashing, press M to add an hour. Press SET to conrm and
go to minutes, press M to add one minute. Hold M longer to add
faster. Press SET to conrm and go to the next alarm setting.
BATTERY
SET
CR2032
If you do not want to set an alarm, press SET to skip this step.