Owner's Manual

EN-3
Screen Display
1. Blood drop symbol 8. Memory symbol
2. Test strip symbol 9. Time
3. Low battery symbol 10. Date
4. Measurement unit 11. Alarm
5. Control solution mode 12. General testing mode
6. Day average 13. Ketone warning
7. Face/Low/High symbol 14. Test result
Getting Started
Initial Setup
Before using your meter for the rst time or if you change the
meter battery, you should check and update these settings.
Make sure you complete the steps below and have your desired
settings saved:
Enter the Setting Mode
Start with the meter o (no test strip inserted). Press SET to turn
on the meter.
BATTERY
SETSET
CR2032
Step 1: Setting the date.
With the year ashing, press M until the correct year appears.
Press SET.
With the month ashing, press M until the correct month
appears. Press SET.
With the day ashing, press M until the correct day appears. Press
SET.