User's Manual

Drilling a path through for DC Jack & Ethernet cables
You can use the canvas on the next page to help drill in a ceiling plate
for the cables to go throug:
• The bigger circle required for Ethernet is 0.9in (23mm) of diameter.
• The smaller one is 0.5in (13mm) diameter for the DC jack.
For the wall mounting option, use
the glitter to secure the DC jack
before screwing in the mounting
plate.
Use a minimum of 4 screws and
associated drywall plug or anchor
to secure the mounting plate to
the wall or ceiling.
Secure the mounting plate