User Guide

FontLab 4
530
To set a single link:
1. Select the single link tool .
2. Position the cursor on the base point. Don’t forget that the position of
the base point must be set by an instruction.
3. Press the left mouse button and drag the mouse to the point that you
want to link. A circle will highlight it. Release the button.
Hold the
SHIFT key down if you do not want to connect the single link to a
standard stem width. If you hold the
SHIFT key the stem settings in the
Options panel will not work.
If the base point of the link is not aligned by some other command,
FontLab will automatically set an Align command on it. Hold down the
CTRL key if you want to prevent this.